Category Archives: Metal Roofing Tips and Basics

Metal Roofing Costs – Consumer Guide 2017

It is a well known fact that metal roofs have always been somewhat expensive compared to the far more widespread composition (asphalt) shingle roofs. – This is mostly due to a much higher base cost of metal roofing materials and installation, and partly due to a simple supply and demand. As money more homeowners nowadays consider metal roofing as a viable alternative to asphalt shingles, it is very common and appropriate to ask how much it might cost.

LEED Platinum House with a standing seam metal roof

Need a Roofer? Get 4 Free Quotes From Local Pros:

Start Here Enter Your Zip Code:

For corrugated and/or ribbed metal roofing profiles, the answer can be anywhere from $3.00 to $7.00 per square foot for the installation of the low-end G-60 (thin, galvanized 29 gauge steel) or mid-range (G-90 steel 26 gauge steel) corrugated or ribbed steel roofing (with exposed fasteners) finished with a lower-grade (cheaper) acrylic paint on the low end or Kynar 500 for G-90 steel panels.

Installation of a ribbed metal panels

For metal shingles and standing seam you can expect to pay anywhere from $7.00 to $12.00 per square foot for the installation of a high-end aluminum standing seam metal roof with concealed fasteners and a lifetime workmanship/labor warranty.

Installation of Aluminum shingles on a residence

Continue reading

Pricing: How to Get the Best Deal on a Metal Roof in 2017

If you have your heart set on a metal roof for your home, but you cringe at the thought of how much it will cost, the good news is that there are ways to save even on such a premium product as metal roofing. Having some insight into different metal roofing materials and styles, as well as better understanding ways roofing contractors operate can help you save thousands of dollars on the cost of materials and installation. Check out these tips and make your dream of owning a metal roof a reality!

Go for Steel as your material of choice

Installation of a ribbed steel panels

It goes without saying that metal roofs can be made out of different types of metal, but what many homeowners don’t know is how greatly the price for these different metals may vary. The cheapest (but also lowest quality) Galvanized corrugated steel starts at $175 per square.

steel shingles metal roof

Need a Roofer? Get 4 Free Quotes From Local Pros:

Start Here Enter Your Zip Code:

The next BIG step up in quality is Architectural steel, which starts at $300 per roof square (100 sq. ft.) for metal shingles and $350 per roof square. for standing seam.

The next upgrade is aluminum, costing, $350+ per roof square for metal shingles and $425+ per roof square for standing seam.

Aluminum Shingle Roof

Premium metals, such as copper and zinc are outrageously expensive: $900-1400 per roof sq. The smartest financial move is to go for a steel shingle roof, because it offers architectural quality and style at a cost close to corrugated metal panels. – You can read more about it here.

Avoid Seasonal Material Price Increases

In the roofing industry, most roofing material suppliers hike up their prices during busy roofing seasons, which are typically during the spring and early fall in most states across the US. You can avoid these seasonal price increases and save money by scheduling your installation at a different time of the year, convenient for you (summer or winter).

Save Big with Metal Roofing Shingles

Tamko steel shingle roof

While you may have initially fallen in love with the clean, contemporary look of standing seam metal roofing panels, the reality is that this style is about 25% more expensive than its more classic counterpart: metal roofing shingles. — Metal shingles can offer a wide variety of style and color options, imitating traditional materials such as slate, clay tile and asphalt shingles.

When it comes to longevity, durability, weather protection and energy efficiency, metal shingles will preform just as well as standing seam. So why do they cost less? The reasons are simple:

1. Metal roofing shingles are easier to install than standing seam panels, so contractors will generally charge you less for the installation. For example, installing steel shingles costs around $750 per roof sq. (without tear-off), while installing steel standing seam panels costs around $1,000 per roof sq. (without tear-off). A similar price difference holds true for aluminum: shingles installation costs $900 per roof sq. (without tear-off), while standing seam installation can easily costs $1,200 per roof square (without tear-off). Overall, it costs about 20 to 25% less to install metal roofing shingles than standing seam.

2. Metal shingles are manufactured from a thinner metal than standing seam, and as a result they cost less. As you can see in the prices for different metals referenced above, regardless of the material, shingles cost as much as as 30% less as standing seam.

Install Roof Shingles

$7,500
Average price
Install Metal Roof

$14,500
Average price
Install Flat Roof

$8,225
Average price

See costs in your area Start Here - Enter Your Zip Code

Be sure to get at least 3 roofing estimates

To ensure that you are getting the best possible deal, contact at least 3 reputable metal roofing contractors in your area for an estimate. Typically, you will get these estimates for free. Your prospective contractors should at the very least be licensed and insured.

When picking a contractor, it is crucial to not only consider their price quotes, but also their reputation. Well-established, mid-size roofing contractors, with many years in the business under the belt, as well as great references will not give you rock bottom prices, because there is no profit in it for them. On the other hand, you should be very weary of “too-good-to-be-true” offers from contractors with mediocre references, because there is a high chance they will not do a very good job on the installation, which will ultimately mean that you will need to spend thousands of dollars to fix their mistakes.

Always compare references based on job specs; these include material type, gauge (thickness), manufacturer, underlayment, tear-off, ventilation, roofing substrate and snow guards. Your best bet is to go with a small roofing contractor that specializes only in metal roofing and has excellent references, because they are the most likely to give you a reasonable middle-of-the-road price along with top-notch service.

Schedule your installation during the Slow Season

As I mentioned earlier, material prices increase during the busy roofing season, and it turns out that installation prices go up as well! This is especially true for good roofers who are in high demand, and when the season gets busy, they can raise their prices by as much as 15%. Again, the busy season is typically spring and early fall (especially in the northern states where people start to prepare their homes for the cold winter season). The downside of doing your installation then is not only a higher price, but also a much longer wait time for the contractor to get started on your project.

However, during the slow season, which is in the summer and in the winter (which is more of a dead season), roofing contractors are in desperate need of new work, so they are willing to be a lot more flexible with the installation prices. Plus, you get the advantage of getting your project started and completed quickly, without the contractor trying to cut corners.

If you are wondering if it is possible to install a new metal roof in the winter, the answer is a resounding Yes! In fact, metal roofing is best installed during cooler months, because metal may sometimes get a bit too hot handle in the summer, so winter is a great time to outfit your home with a brand new metal roof.

Need a Roofer? Get 4 Free Quotes From Local Pros:

Start Here Enter Your Zip Code:

Metal Shingles vs. Standing Seam Metal Roof Costs 2017

Turns out, many homeowners are not even aware that there is not one, but three main types of metal roofing systems available for residential properties; metal shingles, standing seam, and corrugated or ribbed metal panels.

Need a Roofer? Get 4 Free Quotes From Local Pros:

Start Here Enter Your Zip Code:

Thus, there are three distinct styles of metal paneling, all with their own advantages and disadvantages. On average metal roofing costs range from $1.50 to $5.50 per square foot for materials alone, and from $4.50 to $11.00 per square foot installed.

Since roofs are typically measured and priced by squares or 100 square feet of the roof surface, you can expect to pay anywhere from $450 to $1,100 per square of metal roofing installed.

Install Roof Shingles

$7,500
Average price
Install Metal Roof

$14,500
Average price
Install Flat Roof

$8,225
Average price

See costs in your area Start Here - Enter Your Zip Code

Metal Shingles, Shakes, and Tiles

Although, many homeowners are not aware of the existence of metal shingles, it’s a compelling alternative to the traditional composition shingles. All in all, metal shingles cost about double the cost of asphalt shingles installed.

The Cost of Materials for Metal Shingles, Shakes, and Tiles

Metal shingles/tiles and/or metal shakes materials average $3.00 to $4.00 per square foot, or $300 to $400 per square (100 sq. ft.).

Total Cost Installed

Based on that, you can expect to pay about $800 to $900 per square for a metal shingles roof installed. Thus, an average-sized ranch style roof measuring 1,700 square feet or 17 squares will cost anywhere from $13,000 to $16,500 installed, which is roughly twice as much as you would normally pay for an asphalt shingles roof.

Tamko Metalworks - metal shingles roof on a ranch

Tamko Metalworks – metal shingles roof on a ranch

Continue reading